Commercial sweep tractors

Commercial Sweep Tractor

901

GSI has taken a lead in promoting products to enhance safety in your grain facility. We have achieved what we consider to be a “first to the industry” solution for retro-fitting existing sweeps. This is a great solution where rules and regulations prohibit having personnel in bins while sweep augers are running. No longer will you need to “manually” advance the sweep into the pile of grain. With the addition of this tractor an operator can stand at the side door and view the position of the sweep and control it’s operation from a safe distance, or set it in automatic mode and let it advance as the grain is removed.

 

Commercial Sweep Tractor
Knockdown design will fit into a 18″ square door. Tractor will easily retro-fit to existing sweep with minimal fabrication. These kits include a .5 hp, 3 phase, Explosion Proof Motor. (If other motor options are required, please contact GSI sales.)

Tractor Retro-Fit Part Numbers to Match Existing Sweep

Sweep Tractor Part Number
6″ – 8″ GK80170
8″ – 10″ GK80171
10″ – 12″ GK7918
12″ – 14″ GK80098

902

Commercial Sweep Control Panel
Panel is capable of either automatic or manual control. Tractor advance is controlled by auger motor amperage. Portable design allows for easy movement of panel between same size sweeps. All power is connected with plugs in bottom of panel. 3 Phase, 230 or 460 volts. Multiple models cover auger horsepower range of 3-10 (230V) and 3-20 (460V).

 

Control Panel Part Number to Match Existing Sweep’s Auger Horse Power

Auger H.P.

230 V

460 V

3

GCSTP2-03

GCSTP4-03

5

GCSTP2-05

GCSTP4-05

7.5

GCSTP2-75

GCSTP4-75

10

GCSTP2-10

GCSTP4-10

15

N/A

GCSTP4-15

 

Safety First

As with all large machinery with moving parts, it is especially important to follow all safety precautions and warnings when operating this equipment. Failure to do so could result in serious injury or death. Replacement warning decals and operation manuals are available free of charge.

Distributors

903

GSI’s line of Distributors are galvanized for long life and minimum maintenance and come in many sizes and models from which to choose.

3/16″ and 12 gauge body parts with flanged outlets. Located under the distributor is the positive locking stainless steel index plate which offers protection from dust and harsh weather conditions. Large throat on internal swing spout, bottom lined with 1/4″ urethane for extended wear. Swing spout turns on a 1 1/2″ ball bearing, heavy-duty shaft connects to cable control.

 

Specifications

DISTRIBUTOR    

904

A

Outlets

B

C

D

E

F

G

6″

4 Hole

9-7/16″

21-13/16″

30-21/32″

-

-

-

6″

6 Hole

11-3/32″

21-13/16″

30-9/16″

42-9/16″

-

-

6″

8 Hole

10-3/32″

27-21/32″

35-1/32″

16″

50-19/32″

2-3/16″

 

8″

6 Hole

11-1/8″

21-13/16″

30-5/8″

42-9/16″

-

-

8″

8 Hole

12-1/8″

26-7/8″

35-11/16″

15-31/32″

36-3/8″

3-3/16″

8″

10 Hole

12-1/8″

34-5/8″

43-3/8″

15-15/16″

56-3/16″

10-7/16″

 

10″

6 Hole

12-1/8″

26-1/16″

33-1/8″

53-5/32″

-

-

10″

8 Hole

12-1/8″

29-13/16″

36-15/16″

15-15/16″

15-1/4″

11-7/16″

10″

10 Hole

12-1/8″

40-3/8″

47-1/2″

15-15/16″

66-13/16″

14-11/16″

 

12″

4 Hole

13-1/8″

28-1/8″

34-13/16″

24-3/4″

-

-

12″

6 Hole

13-1/8″

28-1/8″

34-13/16″

59-5/16″

-

-

12″

8 Hole

12-1/8″

35-1/16″

41-3/4″

15-15/16″

61-7/8″

11″

12″

10 Hole

13-3/32″

44-1/16″

51-17/32″

15-15/16″

73-15/16″

16-13/32″

 

14″

4 Hole

14-31/32″

32-29/32″

47-7/16″

29-3/16″

-

-

14″

6 Hole

15″

32-29/32″

46-27/32″

67-27/32″

-

-

14″

8 Hole

12-1/8″

40-5/16″

48-7/8″

15-15/16″

70-11/16″

14-1/4″

 

* All 4 and 6 hole distributors are flat back.

* All 8 and 10 hole distributors are wing back

 

Back to Bins sweeps