En-Masse Chain Conveyors

 En-Masse Chain Conveyors

01

GSI 12″, 14″, and 20″ En-Masse Chain Conveyors offer many features to maximize performance and reduce operation costs. For larger grain capacity requirements, GSI offers a 26″ and 32″ En-MasseConveyor. These conveyors feature an extra heavy-duty construction and easy access to all vital hardware. All of GSI’s conveyors are highly corrosion resistant and come standard with a powder coat finish for lasting durability and superior appearance.

02

Tail Section
Extended mount flange bearings on 12” (304.8 mm) and 14” (355.6 mm) tall chain conveyors. External mount pillow block bearings on 20” (508mm) tall conveyors. Heavy duty chain tension take-up system utilizing corrosion resistant acme threaded screws. Flame cut hardened steel sprockets. Split hubs available. Maintenance friendly, bolted access to allow removal of the shaft, sprocket, and bearings as an assembly. 10 gauge housing on 12” and 14” conveyors, 7 gauge on 20” conveyors. Tail shafts are turned ground and polished.

03

Head Section
Extended mount flange bearings on 12” (304.8 mm) and 14” (355.6 mm) tall conveyors. External mount pillow block bearings on 20” (508 mm) tall conveyors. Machined .25” thick UHMW shaft seals. Flame cut hardened steel sprockets. Split hubs available. Maintenance friendly, bolted access to allow removal of the shaft, sprocket, and bearings as an assembly. 10 gauge housing on 12” and 14” conveyors, 7 gauge on 20” conveyors. Head shafts are turned ground and polished.

Trough Section Features
Dust and weather tight, heavy gauge, peaked covers on head, tail and intermediate trough. Abrasion resistant steel wear liners with recessed fasteners for removal or replacement. Bolted removable bottom construction. Standard 10 gauge (3.41mm) intermediate trough sides. Trough sections are fixture assembled for accurate alignment and ease of installation. Trough sections are flanged with structural angle to provide rigidity and accurate alignment. Standard roller chain engineered for each specific conveyor to maximize working load and expected life. UHMW flights prevent steel to steel contact. UHMW return rollers with shafts bolted to trough for easy maintenance and replacement are standard on 12” to 14” tall conveyors. Rail returns are standard on all 20” tall conveyors. Rails are lined with .25” abrasion resistant steel and tapered end to end to minimize flight wear and maximize cleaning. Rails overlap at flange connections for smooth operation.

26″ and 32″ Tall En-Masse Chain Conveyors
En-Masse Chain Conveyor standard features and options include 6” (152.4mm) pitch welded steel chain with v-cup flight attachments and factory mounted paddles. Abrasion resistant steel wear liners with recessed fasteners for removal or replacement. Slack chain switch. Hinged head relief door with limit switch standard. Head and tail housing split for shaft and sprocket removal. Standard split sprockets

04 05

Back to Conveyors